Discontinued VapeXhale Cloud EVO

biohacker

Well-Known Member
Yeah it's too bad they don't produce some of those awesome HT's anymore....same with the older evolver.

Given that I combusted a couple of times with hi temps I doubt max temp is 225C. I think more 250/270C.. Is it even possible?

I doubt it. That's way too hot and forsure would lead to combustion. I think combustion with the evo is the exception not the rule. I think the only real way to combust in the evo is one of two scenarios:

1. defective evo/broken bamboo
or
2. suuuper slow and long draw on abv or super fine grind dry material on max temp super heat soaked?

I dunno, just guessing really haha
 
Last edited:

sixstringsmash

Well-Known Member
I got my EVO to combust once but I had to turn the dial all the way up and really huff on it for a bit. At first I thought it wouldn't do it but I did get it to with some effort. I definitely had to go out of my way to make it happen.

Our evos must be tuned differently! As long as I don't go past 2ish I'll never combust but I can't tell you how many times I've accidentally flicked the evo dial with my wrist all the way up and blackened my whole ELB when trying to take a hit. Not saying that I combust with it a lot but if I accidentally put the temp up way too much a combustion even is definitely probably going to happen unless I realize what I've done before I go to take a hit.
 

sixstringsmash

Well-Known Member
Black ABV is close but I am talking about fire in the ELB with ash left over. When I pulled it out I could see the cherry inside the ELB burning and it was HOT as hell.
Yeah I'm talking about combustion events in mine too. What I meant to say is not that the ABV was black but the ELB. The ABV on the inside would combust and leave the ELB a black charry mess.
 

biohacker

Well-Known Member
Our evos must be tuned differently! As long as I don't go past 2ish I'll never combust but I can't tell you how many times I've accidentally flicked the evo dial with my wrist all the way up and blackened my whole ELB when trying to take a hit. Not saying that I combust with it a lot but if I accidentally put the temp up way too much a combustion even is definitely probably going to happen unless I realize what I've done before I go to take a hit.

Are you sure your EVO isn't defective? IMO (and i've only used 2 different EVO's but multiple Clouds) you shouldn't be having those events really at all even at full temp, as attested to by T-dub. Might not hurt to send yours in.
 

ataxian

PALE BLUE DOT
I agree, I dont want my evo to have digital temp display....

I'm happy with my knob...

@ataxian's fell off....
tFlqGx3.jpg

S6YPCgu.jpg

Not even close to being real COLAS = CIVILIZED
@Cannabis Connoisseur this is how we roll!
@lazylathe I tried many however I EVO a lot? (I love the taste) @t-dub your the coolest! (wish I could grow OUTSIDE)
I do what my wife say's! (hide it!)
 
Last edited:

sixstringsmash

Well-Known Member
Are you sure your EVO isn't defective? IMO (and i've only used 2 different EVO's but multiple Clouds) you shouldn't be having those events really at all even at full temp, as attested to by T-dub. Might not hurt to send yours in.

I'd hope not! It honestly might be though seeing as my evo's temperature doesn't seem to be the status quo compared to everyone else, but at the same time if the only problem is that the temperature on mine runs a little hotter than normal I really don't see a huge enough issue to send it in personally. Now on the other hand if they could make the dial knob a little heavier for me so I'm not always accidentally turning it to 11 then I'd send it in within a heartbeat! :D
 

lazylathe

Almost there...
tFlqGx3.jpg

S6YPCgu.jpg

Not even close to being real COLAS = CIVILIZED
@Cannabis Connoisseur this is how we roll!
@lazylathe I tried many however I EVO a lot? (I love the taste) @t-dub your the coolest! (wish I could grow OUTSIDE)
I do what my wife say's! (hide it!)

That is a sight of beauty @ataxian !!!
Wish i could smell that through the screen!

I am loving my digital Evo!
Flavor is amazing every time since the temp is exactly the same!
Hits hard, produces a lot of vapor!

EVO = CIVILIZED!
 

vapomancer

Well-Known Member
Black ABV is close but I am talking about fire in the ELB with ash left over. When I pulled it out I could see the cherry inside the ELB burning and it was HOT as hell.

I had the same thing happen - i had left evo on max temp after burning my nail clean at the end of a session , turned it on next morning and unknowingly preheated it to max temp , then stuffed an elb half full of kief in to warm ... 1st hit was my first combustion in 3 years :puke: , pulled elb out and it had a cherry still glowing .

my evo is about 18 months old , never serviced ,and i usually run it at 11 to 12:30 with no problems at all , but it WILL fry down there at 5:00
 

kellya86

Herb gardener...
tFlqGx3.jpg

S6YPCgu.jpg

Not even close to being real COLAS = CIVILIZED
@Cannabis Connoisseur this is how we roll!
@lazylathe I tried many however I EVO a lot? (I love the taste) @t-dub your the coolest! (wish I could grow OUTSIDE)
I do what my wife say's! (hide it!)

I wish I could scale up... your room is mighty...

The police wouldn't belive that's all for me...

If my country hasnt got it's shit together by the time my kids are grown up, (another 10 years), then im coming to live in cali @ataxian....

And look at your glass resting precariously on your solo, on ceramic tiles....
You do live dangerously....
 

lazylathe

Almost there...
@ataxian

This is how my updated Cloud looks now!
When i get some time i want to make a new enclosure and sort out the wire situation!
Fully customized Cloud++! One day when i get time...

For now this beast works like a BomB!

masIpJL.jpg


I wonder if any glass maker would be able to make similar bamboo tubes to the Cloud?
Possibly with a slightly thicker glass section where the heater will sit for more heat retention
This may be an interesting project, especially since i have 4 spare heaters and the RDK controller is quite affordable as well!
 

gaseous_clay

Well-Known Member
I feel like I just looking at one of those robot monster things where they just put together random parts.

What in the holy hell did you do to that Cloud? Explain yourself. :cool:

On a more serious note, if you did what it looks like you did, bravo! As for an enclosure, I'm not familiar with the Cloud, but it looks like the outside black enclosure part sits around the silver part like a sleeve. If this is correct, wouldn't it be possible to get a woodworker to put something together that would incorporate the Cloud & the new control in one luxurious log?
 
Last edited:

ataxian

PALE BLUE DOT
@ataxian

This is how my updated Cloud looks now!
When i get some time i want to make a new enclosure and sort out the wire situation!
Fully customized Cloud++! One day when i get time...

For now this beast works like a BomB!

masIpJL.jpg


I wonder if any glass maker would be able to make similar bamboo tubes to the Cloud?
Possibly with a slightly thicker glass section where the heater will sit for more heat retention
This may be an interesting project, especially since i have 4 spare heaters and the RDK controller is quite affordable as well!
You know how your super smart?
Why don't you just make your own vaporizer?
We have GLASS BLOWER'S all over the place?
CANADA must have just has many?
Drive around INDUSTRIAL garages and ask around?

HEAT + CLEAN VAPOR ESCAPE + SMALL MOUTHPIECE = CIVILIZED

DIAMOND STICK MATCHES + ZIG ZAG's + COLAS = OLD SCHOOL (pre-BIC)

What I like about the EVO is plug it in adjust your level and read ASTROPHYSICS = CANNABIS safer than MILK or BEER? EVEN SODA!

Why is it ILLEGAL in some places?

HARMLESS PLANT?

We have CANNABINOID receptors.
CANNABIS is the KEY to unlock.

@kellya86 you and the family are coming in MAY?
It's pretty nice everywhere at that time.
 
Last edited:

kellya86

Herb gardener...
I had not seen any videos with the function of the Incycler, so I found one from SM himself


Debating whether or not to get one from the "Seconds." Do I need more glass? No. Do I need to spend $200+? ($250 - 20%) No. Am I a bit obsessive? Yes.

Only just watched this due to poor internet all day...

He says at the end there will be a couple of new pieces, every few months....
That's gonna get expensive...
I wonder if I wait a year, then buy a whole set in one go, I'll get a discount....???

Can vapexhale be haggled with..???
If I'm spending a couple of grand on glass, I wanna feel like I'm getting a deal...

@ataxian I am bringing my family over in may, but not to live.... yet....
 

lazylathe

Almost there...
I feel like I just looking at one of those robot monster things where they just put together random parts.

What in the holy hell did you do to that Cloud? Explain yourself. :cool:

On a more serious note, if you did what it looks like you did, bravo! As for an enclosure, I'm not familiar with the Cloud, but it looks like the outside black enclosure part sits around the silver part like a sleeve. If this is correct, wouldn't it be possible to get a woodworker to put something together that would incorporate the Cloud & the new control in one luxurious log?

You can read all about my journey here:

http://fuckcombustion.com/threads/cloud-repairs.13892/
 

ataxian

PALE BLUE DOT
Top Bottom