• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Flowermate Swift Pro

Zangano Cruel

IG zan.cru (code) zancru (5% NV checkout discount)
Hola FC:
My @PuffItUp Swift Pro arrived today 3:30am to closest USPS.
I'm holding it for facility pickup... 9AM is so close, tic tac tic tac tic...
Working today, even living a mile from the USPS, If I let the mailman sort it for delivery, I'll not see my SP till late afternoon...
I'm going to check both the SP&CFV threads,about out of the box first usage or, first plug in, and fully charge battery before first usage???
Probably the second option is the best, but who knows, always better asking FC for the best advice possible...
I'm guessing a light ISO Q-tip oven/mouthpiece/exposed air/vapor paths clean/soak/rinse is a plus like every other vape.
I can't wait to try this new toy...
Stay vaped my friends...
 

steviekool

Well-Known Member
I'm in the same boat. My puffitup order arrived today also. No one is better than them, as far as customer service, speed of delivery and prices. They are the kings, and thank you as always Randy, "I know you lurk here lol" also thanks for that cool little green grinder/case thingie. Kind of a nice freebie.

One thing I want to stress is that even though the box and I believe any website states it comes with 2 walls, it actually comes with 4 total. One inside the vape already, and another 3. 2 for sure is wood, another glass, and another I think is wood but not entirely sure haha.

I plugged it in to charge, and the battery was already full so we got a head start.

Waiting for my daughter to go to bed and then it's time to spend a little quality time with this thing.

Going to give it a good ISO cleaning and rock and roll. 400 degrees right off the bat as I like clouds :) will report back with my findings either later tonight or tomorrow.
 

Zangano Cruel

IG zan.cru (code) zancru (5% NV checkout discount)
I'm in the same boat. My puffitup order arrived today also. No one is better than them, as far as customer service, speed of delivery and prices. They are the kings, and thank you as always Randy, "I know you lurk here lol" also thanks for that cool little green grinder/case thingie. Kind of a nice freebie.

One thing I want to stress is that even though the box and I believe any website states it comes with 2 walls, it actually comes with 4 total. One inside the vape already, and another 3. 2 for sure is wood, another glass, and another I think is wood but not entirely sure haha.

I plugged it in to charge, and the battery was already full so we got a head start.

Waiting for my daughter to go to bed and then it's time to spend a little quality time with this thing.

Going to give it a good ISO cleaning and rock and roll. 400 degrees right off the bat as I like clouds :) will report back with my findings either later tonight or tomorrow.
Hola FC:
Be careful not to ISO the mouthpiece shell.
Some ISO, wash off on it, and I didn't notice.
After a few minutes the outside coating was gone :((.
Still testing, but overall is great at the moment.
Stay vaped....
 

steviekool

Well-Known Member
So, here we go. I used this last night, and a few minutes ago, let's talk :)

This thing is super light, as previously stated. Not cheap feeling, but lighter than you would think.

I had to kind of learn this process of slow deep 10 second inhales, as this is my first convection, so slow and steady wins the race. With this method, and at a considerably high temp, "420, hah", after about 2 hits the clouds arrive and get bigger by the hit. Very tasty throughout the whole session, only really changes at the end when your done anyway. This is different from my other vapes as those lose flavor faster.

The method I came up with, "and should be law, haha!" Is 2 full sessions back to back. This thing turns off after 4 minutes, so turn it back on immediately, and continue the next 4 minutes and your set. Also with this, at the halfway point, give a quick stir. Follow this and you will be happy :)

Yesterday I stated when it arrived I plugged it in to charge, but it showed full so I unplugged it. I can say now that after my session last night and today, both identical to my method above, the battery showed it was low. Maybe it really wasn't fully charged, so it's charging now, gonna give it a good couple of hours and see if there is any difference.

Zangano, may I ask, what do you recommend, or anyone for that matter, to clean the actual mouthpiece? I'm talking actually inside. I was gonna just dip a pipe cleaner into ISO and use that but after reading your post, I'm hesitant.

Along with that, cleaning is fairly easy, but not as easy as a solo or Air, I guess that's obvious.

Heat up time truly is like 30 seconds.

Again noting there are 4 walls that come with this, not 2 as advertised. Seems like 3 woods, and a glass. Using glass currently, but will swap out eventually and see if it actually tastes different.

That's all I got I guess for now, any questions feel free. Will add if anything else stands out.
 
After more time with this vape it impresses me even more. It has a really quick heat up time and the flavor is great for so long. It gives me a really nice head high and I have found 2 sessions back to back are perfect. I start at 400 and work my way up to 446. You do have to stir because I have found the center of the material to brown faster than around the edges of the bowl. I found a fine grind with a light pack works best for me.

The rings it comes with are really cool and actually make a difference. My favorite is the lightest colored wood one. To me it kind of gives a cedar taste but its not overwhelming. All of the wood ones provide really good flavor and are each different. My least favorite is the quartz, it seems to dull the flavor down but its still good. Them being interchangeable is really cool and I saw on the CFV thread they are making a stainless steel which would be interesting because it is more conduction.

The battery is this vapes biggest downfall. After a 2x4 minute session whenever I come back to use the vape again later the battery meter shows just under a half charge. I do another 2x4 minute and it has about a 1/3 left. I can get another 2x4 session before it needs charging. So for me a total of 3 uses before its dead which isn't the worst but its nowhere near the best. If it had a removable battery that would be amazing.

I find myself reaching for this vape more and more because its really easy to use and gives great results. I recently purchased the davinci iq as well and the swift pro has been better in every way other than battery life. I dunno if my iq is defective but this swift pro is awesome. Its getting daily use and for the black Friday price is definitely worth it and I almost wish I bought another one
 

steviekool

Well-Known Member
Hey Chandler,

I have an Arizer solo and Air, a pax 2, an Indica, an MFLB, and another crappy one I don't remember since I haven't touched it in a year or so.

Looking shortly to add a desktop one, most likely the VapeExhale EVO, as it seems like a big boys ArIzer Solo, haha.

Daily driver? Too early to tell, this is the honeymoon so right now yes. Ask me again in a month :). But honestly I do like to rotate them out like weekly so that probably what will happen.

Wazzu,

I am going to try the wood one soon. What I like to do is get a q tip and dip it in some nice whiskey, then lightly coat the wood and let it dry. Gives a wonderful taste, and actually acts as a cleaner too.
 

Zangano Cruel

IG zan.cru (code) zancru (5% NV checkout discount)
Hola FC:
I received my unit and I'm happy with it... just a little bit concerned about the outer finish shell quality, perhaps...
Before using first time my vapes, I try to be very cautious and ISO the parts I consider safe to...
I did with the Swift MP, I made sure to disassemble it before, but I guess I didn't rinse the ISO parts very well, and perhaps I didn't wait too long to let them dry enough.
Things happen, after a few minutes while I left it unattended, came back to an all wrinkled and bubbly messed up mouthpiece outside coating... kind of bummed...

iFN0h1M.jpg


The other dark side...

Tprr2g2.jpg


Quick photo tutorial of how to tear apart the mouthpiece...

QvT6jdK.jpg


Mqj6ImF.jpg

O1riG0m.jpg


fPHmrWH.jpg


NdP4tiK.jpg


I'm still testing and trying some extra screens to cut airflow and produce denser clouds...
Stay vaped...
 
Last edited:

steviekool

Well-Known Member
Dude that is crazy. I feel o have used ISO before on plastic parts of vapes and never had any sort of issue. Really strange and makes me be extra super careful when cleaning this thing now.... Never seen anything like that from ISO.
 
steviekool,

Fat Freddy

FUCK CANCER TOO !
@Zangano Cruel - apparently this is an issue with the Swift Pro, AND, the @Boundless Vape Technology CFV.

I think most of FC members find that kind of slipshod manufacturing highly unacceptable! I certainly do!

I suggest those concerned each take the time to contact Smiss and ask them how they plan to remedy the issue!

SMISS TECHNOLOGY CO., LTD

Tel: +86-755-2955 2252 Fax:+86-755-2955 2229

Email: salesmanager@smisscigarette.com sales@smisscigarette.com

Address: 3/F, West of Building E, Huachuangda Industrial Park, Gushu Village, Xixiang Town, Bao'an District, Shenzhen, China 518106

www.smisscigarette.com


Sub-Companies of SMISS Group

Shenzhen SPK Technology Co., Ltd (Charger Company)

Tel: +86-755-8384 9495Fax: +86-755-8384 9377

Address: 4/F, Guanghuaxing Building, No. 9 Chongqing Rd, Qiaotou Village, Fuyong Town, Bao'an District, Shenzhen, China 510000

www.spowerking.com
 
Fat Freddy,

KeroZen

Chronic vapaholic
Well it's the same with the black Ascent. Exact same rubber-like coating but it's not real rubber, just a thin film.

Maybe the manual should warn about the risk but in general plastics and ISO are not meant to be together. Even worse with coated plastics like in our case.
 
KeroZen,

Fat Freddy

FUCK CANCER TOO !
Well it's the same with the black Ascent. Exact same rubber-like coating but it's not real rubber, just a thin film.

Maybe the manual should warn about the risk but in general plastics and ISO are not meant to be together. Even worse with coated plastics like in our case.

Yep, you are right....a warning at the very least and a recommendation as to what agents are safe and effective.

And maybe if enough customers provide "feedback" they might correct the situation?

Then again, maybe they don't give a rat's arse? :shrug:

There...rant over.

.
 
Last edited:

ginolicious

Well-Known Member
That video so makes me want a Swift Pro so badly. But the one issue I have is the mouth piece and how to clean it. Heard of some people having issues with ISO, and that concerns me.
 
ginolicious,

doubledown

Well-Known Member
Is the metal part of the mouthpiece removable? It doesn't seem to be and I'd think it would be necessary to clean the inside eventually.
 
doubledown,

doubledown

Well-Known Member
I've tried everything short of pliers. Mine won't separate from the plastic lid.
 
doubledown,

shaolinmilk

Well-Known Member
I just got one of these from PIU. Sounded like a great deal so we'll see how it is once it gets here. I'm wondering how you guys like to pack your herb in this device. Do you tamp or leave it loose? I also got the Boundless WPA so I hope it fits and if it didn't, I needed one anyways for the CFX.
 
shaolinmilk,
I just got one of these from PIU. Sounded like a great deal so we'll see how it is once it gets here. I'm wondering how you guys like to pack your herb in this device. Do you tamp or leave it loose? I also got the Boundless WPA so I hope it fits and if it didn't, I needed one anyways for the CFX.
Pretty much all convection vaporizers perform the best when the bud material is NOT packed in. You need hot air pulled around and through the bud material in order to do cannabinoid and terpene extraction.
 
archangelz001,
Top Bottom