Recent Acquisitions - Post Your New Pieces Here

brucee10

Well-Known Member
OK, I found my new favorite rig, maybe for a while. It is made by @Phattassglass , And it is Phatt! It is his Hover Perc and it rocks with any water level! It has a few gridded rows on that unique hovering perc. Very tasty for dabs but would give enough diffusion for flower for sure. And it's THICK AND HEAVY! The enail doesn't tip it at all even with the Heaviest liger, hurricane cap and drop down!. I liked it so much I flipped out and bought a second one of the same rig in another color :doh: I'm sick guys, help me lol! But check this guy out if you haven't!

B7njXtJ.jpg

80EX7vb.jpg

8pCIaBC.jpg
a2jQBUW.jpg

CwVrLdc.jpg

UK6Z28Y.jpg

0VQ1YEb.jpg

Just one more artist that I've started following because of you. I'm definitely going to pick up one of these eventually.
 
brucee10,

mrbonsai420

Accessory Maker
Accessory Maker
Just one more artist that I've started following because of you. I'm definitely going to pick up one of these eventually.


Yeah the perc is very unique and I wanted something that will stand up with an enail and drop unlike most small rigs made for torch bangers these days. The quality couldn't be better and it's hard to pick up all of the sparkly nuances on the joint and lips but trust me, it's tight!

This one is cool and classy, I'm in love! The other one I have coming is Yellow Crayon and Blue Cheese, It's so fucking flashy and loud, I like it too lol! If you are looking at his stuff his Splatter percs are also awesome and he makes a nice Klein.
 
Last edited:

Baron23

Well-Known Member
Yeah the prec is very unique and I wanted something that will stand up with an enail and drop unlike most small rigs made for torch bangers these days. The quality couldn't be better and it's hard to pick up all of the sparkly nuances on the joint and lips but trust me, it's tight!

This one is cool and classy, I'm in love! The other one I have coming is Yellow Crayon and Blue Cheese, It's so fucking flashy and loud, I like it too lol! If you are looking at his stuff his Splatter percs are also awesome and he makes a nice Klein.
Hi @mrbonsai420 - beautiful. A shop near me has some small pieces of PAG and its fabulous.

May I ask where you got it from and, if you are comfortable, approximate magnitude of cost. I really like the PAG pieces I am looking at but they are at $350 or so. Not out of reach if I want one, but enough to give me a bit of pause.
 
Baron23,

mrbonsai420

Accessory Maker
Accessory Maker
Hi @mrbonsai420 - beautiful. A shop near me has some small pieces of PAG and its fabulous.

May I ask where you got it from and, if you are comfortable, approximate magnitude of cost. I really like the PAG pieces I am looking at but they are at $350 or so. Not out of reach if I want one, but enough to give me a bit of pause.

If they are this size and only $350 that is below retail and lower than he sells them for himself actually. I haven't gotten a quote from him for less than $500 on a piece and I have asked about several. I found smaller artists you can get a much better deal from the artist. BUT once they get bigger they don't like to undercut the shops that carry their items. So they quote retail. Best place for his stuff is to find a reseller that gets a deal as a wholeseller and passes that deal along to you via an auction or sale. If it's $350 for a Splatter or Hover perc this size I would say that is very fair.

In fact I just checked the price on one Purplecity420 has for sale, he wants $420 for his.
 
mrbonsai420,

Baron23

Well-Known Member
If they are this size and only $350 that is below retail and lower than he sells them for himself actually. I haven't gotten a quote from him for less than $500 on a piece and I have asked about several. I found smaller artists you can get a much better deal from the artist. BUT once they get bigger they don't like to undercut the shops that carry their items. So they quote retail. Best place for his stuff is to find a reseller that gets a deal as a wholeseller and passes that deal along to you via an auction or sale. If it's $350 for a Splatter or Hover perc this size I would say that is very fair.

In fact I just checked the price on one Purplecity420 has for sale, he wants $420 for his.
I need to look at it again. No, it does not have the amount of color your has...by a long shot. Its only colored around the mouthpiece, base, and....and I have to look at it again. Its a small piece...slightly bigger than the Bates internal. I'll check it out and let you know...they may have had it quite a long time and got it at lower price. Dunno.

Thanks
 
Baron23,

mrbonsai420

Accessory Maker
Accessory Maker
YAY! @Phattassglass Hover Perc #2 is in. It's hard to get his glass nuances on camera but there are these beautiful lines in the yellow on this, it looks fantastic. I thought since I bought 2 rigs so close that I might sell one eventually but these are so dope I may need to keep them as a team lol!

QGrc0ym.jpg

oRbV9i4.jpg

FrErPOa.jpg

w76NYFB.jpg

KNeugFk.jpg

HhRKPxR.jpg

AduhG8I.jpg
 
Last edited:

Baron23

Well-Known Member
YAY! @Phattassglass Hover Perc #2 is in. It's hard to get his glass nuances on camera but there are these beautiful lines in the yellow on this, it looks fantastic. I thought since I bought 2 rigs so close that I might sell one eventually but these are so dope I may need to keep them as a team lol!

QGrc0ym.jpg

oRbV9i4.jpg

FrErPOa.jpg

w76NYFB.jpg

KNeugFk.jpg

HhRKPxR.jpg
Wow dude...they are indeed beautiful. Love the yellow flower it the button (or whatever you call it LOL).

Congrats. As my grandmother would say: "wear it in the best of health!" LOL
 

OldOyler

Fire it again. I can still find the ground.
Peace all,

I have a knack for following right after a jedi master like @mrbonsai420 ...!

(One day, I hope to have enough money to beg joda gw to make me a custom Vault-Boy perc...)

Thanks to @kellya86 for the confidence boost to post a pic of my FIRST purchased piece of glass! I have been using a 3" tall donated bubbler, never used anything for concentrates before except that.

Anyway, it's basically dankstop.com's house version of a Mobius matrix sidecar, from what I can tell. Cost me $94.50 with a 10% coupon code. Free shipping, they shipped same day and I got it a day earlier than the 3 day estimate (east coast in NJ). Extremely happy.

Wife says NO dhgate or opening cc's to int'l orders, or running air cards. My life...is sooo good and simple. Ah. :)

Speaking of simple...here's the piece. VERY heavy glass, I love it. Here's the link: http://dankstop.com/best-sellers/best-bongs/dankstop-matrix-perc-sidecar-water-pipe/, and I am extremely happy with the company and love their selection, yeah US-based so a bit higher $. I'll deal. :)

Took one empty for best detail:

perc_side.jpg


perc_ready.jpg


And finally, milky milky...

perc_milky.jpg


Ahhhh. It is freaking AWESOME...absolute perfect draw.

:tup:

Peace everyone, and good vaping!
 

OldOyler

Fire it again. I can still find the ground.
Peace all!

That water level is really high. Try lowering it an inch or so to keep your lips from getting splashback.
It certainly is up there, I'm sure that must be robbing some flavour.
I've found my matrix sidecar works well with the water level anywhere from just touching the top of the perc to a couple centimetres above
You know I effing absolutely love FC!

Spot on, got rid of half the water and BING there's my lemon/mango flavor back to full strength!

Awesome, good things back at you both!

:peace:
 

herbivore21

Well-Known Member
Peace all,

I have a knack for following right after a jedi master like @mrbonsai420 ...!

(One day, I hope to have enough money to beg joda gw to make me a custom Vault-Boy perc...)

Thanks to @kellya86 for the confidence boost to post a pic of my FIRST purchased piece of glass! I have been using a 3" tall donated bubbler, never used anything for concentrates before except that.

Anyway, it's basically dankstop.com's house version of a Mobius matrix sidecar, from what I can tell. Cost me $94.50 with a 10% coupon code. Free shipping, they shipped same day and I got it a day earlier than the 3 day estimate (east coast in NJ). Extremely happy.

Wife says NO dhgate or opening cc's to int'l orders, or running air cards. My life...is sooo good and simple. Ah. :)

Speaking of simple...here's the piece. VERY heavy glass, I love it. Here's the link: http://dankstop.com/best-sellers/best-bongs/dankstop-matrix-perc-sidecar-water-pipe/, and I am extremely happy with the company and love their selection, yeah US-based so a bit higher $. I'll deal. :)

Took one empty for best detail:

perc_side.jpg


perc_ready.jpg


And finally, milky milky...

perc_milky.jpg


Ahhhh. It is freaking AWESOME...absolute perfect draw.

:tup:

Peace everyone, and good vaping!
The other guys beat me to it, you got your water up too high. Moltentiger knows what's up, typically it is best to put in just enough water to cover the perc itself. Looks like you got that resolved already though :)

I gotta say bro, that matrix knock-off looks infinitely better than an official VXH hydrabomb (also matrix knock-off lol) hydratube I bought once (and immediately returned).

Your piece has nice, straight, properly aligned perc placement and the welds look solid, with a thick base and what looks like good thick glass too.

VXH's offering on the other hand suffered from a jenky perc (the cage was not at all symmetrical and the gaps between different slits varied wildly), lopsided perc placement (requiring a higher water level to cover the perc because one side of the perc sat higher than the other!), a number of incomplete welds (including an outright crack in the surface of the glass!) and devitrification of the glass (basically this refers to the glass losing it's see-through, smooth and fused quality).

Great price on your rig and it looks reliably built to boot! Glad to see you enjoying it :) I think the wife was wise to tell you to keep purchases within the US; DHgate, as many will tell you here can be a gamble. You got a durable and well made rig delivered to you very quickly for under $100, I doubt that DHgate vendors can reliably compete with any aspect of that deal except the price!
 

mrbonsai420

Accessory Maker
Accessory Maker
Posted this in the IG thread but no one looks at it lol.
So, My next piece is either Going to be from Bowman Glass, Hondo Glass, or Red Tail Glass. This is a very hard choice. I will one day own all 3 I hope but for now I am leaning towards a custom fab from Redtail glass. Either that or a Bowman Window rig or any of the Pineapple pattern Percs from Hondo. Damn this is a hard choice! I guess I will just consider is which one is first and not worry about it and hope one day I have one of each.
Any thoughts or suggestions?


I also have my eye on a VERY nice piece from @Sleeping_glass (Mothership artist) That is a little pricey but I am in love with it.
 

invertedisdead

PHASE3
Manufacturer
Posted this in the IG thread but no one looks at it lol.
So, My next piece is either Going to be from Bowman Glass, Hondo Glass, or Red Tail Glass. This is a very hard choice. I will one day own all 3 I hope but for now I am leaning towards a custom fab from Redtail glass. Either that or a Bowman Window rig or any of the Pineapple pattern Percs from Hondo. Damn this is a hard choice! I guess I will just consider is which one is first and not worry about it and hope one day I have one of each.
Any thoughts or suggestions?


I also have my eye on a VERY nice piece from @Sleeping_glass (Mothership artist) That is a little pricey but I am in love with it.

My vote is Bowman... don't have one but been following him for a while. I love his art. If I had the $$$ that's who would get it. Also really like Amani Summerday.
 
invertedisdead,

alittledabwilldoya'

Sapphire Powered Dabstronaut.
Posted this in the IG thread but no one looks at it lol.
So, My next piece is either Going to be from Bowman Glass, Hondo Glass, or Red Tail Glass. This is a very hard choice. I will one day own all 3 I hope but for now I am leaning towards a custom fab from Redtail glass. Either that or a Bowman Window rig or any of the Pineapple pattern Percs from Hondo. Damn this is a hard choice! I guess I will just consider is which one is first and not worry about it and hope one day I have one of each.
Any thoughts or suggestions?


I also have my eye on a VERY nice piece from @Sleeping_glass (Mothership artist) That is a little pricey but I am in love with it.

Hmmm, not sure how much you're looking at spending.
I was initially leaning toward Hondo.
But your question sent me down a rabbit hole and I found this:
http://www.headyhawaii.com/shop-1/2...ight-fab-mini-tube-w-ecnased-implosion-marble

And it's on sale, so by buying it you actually save $150!
:\:p

I can't stop looking at Dok Glass and Andy Roth ... WOOF!

EDIT: Oh God, just buy this instead: https://www.instagram.com/p/BNxfCuLj4DJ/?taken-by=glassmaps_
 

OldOyler

Fire it again. I can still find the ground.
Peace all!

New "Esposito" barrel perc *finally* arrived. Someone said US company drop-shipping from China? YUP. Peeved me off pretty bad, too - company 420elite.com was *totally* unresponsive, but DID meet their overall shipping promises of 14 days. But still, I almost stopped the charge when I couldn't get any tracking numbers, not a single response to several emails and several polite "Contact Us" requests for the info. But I figured $40 though with free shipping, so more work to return it at this point out of spite...

Sigh. But, I do really dig the thing. Will be testing later this evening. Love the 4-level barrel perc, and the raised mouthpiece (I have a meeeeeesed up spine, in this case the cervical pain is really helped by not having to lean in too far.

Posted first pic of it alone, no water, with Yocan Torch (for sizing), then next to the matrix perc I got from dankstop.

Peace everyone!

EDIT: Tested and absolutely perfect size and design for the Yocan Torch. I LOVE it. Peace!

esposito_alone.jpg


esposito_next_to_matrix_perc.jpg


Peace and good things to everyone!
 
Last edited:

Baron23

Well-Known Member

mrbonsai420

Accessory Maker
Accessory Maker
Better up your bid. No it is not me:).


So I lost that Hondo Piece but it was a good loss. I did bid again but in the end I let her have it :( She said it was going to be a Christmas present for her husband so I quit bidding at $860/ That is easily a $1300 piece so she did well. You win some you lose some. But it would have been dope, UV reactive, Dichro and all.

https://www.instagram.com/p/BNxI36GDieB/
 
Top Bottom