RBT Milaana stems by cannabis.pro

cannabis.pro

aka 420EDC
Accessory Maker
Just a quick update for all of you who pre-ordered or those of you international preorders waiting on a shipping quote. By this time next week, i should have glass on hand to ship. There was a misunderstanding on my end as to when it would be finished. 2nd Week of September is technically this week but last week was not a full September week, so please bare with me a few more days while we wrap up production. We obviously don't want to rush it.

I hope to have everything shipped by this time next week or Saturday morning at the latest.

I apologize for the few days delay and look forward to everyone's feedback on the Glassware.

Thank you again for the support.
 

cannabis.pro

aka 420EDC
Accessory Maker
Another quick update:

Production will complete today or tomorrow
We've increased our initial order for both the TopHat and 18:18. The 18:18 is sold out currently.

That's awesome folks! Thank you so much for the support. Can't wait to get all this glass into your hands and Milaana (and Zion for the lucky few).
 

cannabis.pro

aka 420EDC
Accessory Maker
@CannabisPro:
And the next production run will have the 18/14s as well, right? Pretty please...I can't be the only one who wants one (or two).
There is one 18:14 remaining in the current run. @BadDog No

For the rest reading the thread and waiting on this glass, the bulk order is enroute to our fulfillment center it may arrive today (waiting for tracking to update with a scan at the local post office) or should definitely be here tomorrow. Tomorrow the local Post Office is only open to noon, so I will likely inventory everything and do a QA check and ship US orders Monday.

International folks that I've been in private conversation with, please pass along your PayPal email address if you haven't already and I'll prepare a shipping quote. Also for you international folks (or others waiting on glass within the US and want to save on shipping), we are adding some new products to the shop:
  • Mendo Mulchers in 3 sizes w/ screen (3", 2.25", and 1.75") & 4 sizes in 2 piece (1.5", 1.75", 2.25", 3").
  • Vitality Glassware (Miron glass) in 5ml, 15ml, 30ml, 50ml, 100ml, 200ml.
  • Last but not least Doob Tubes in the regular size are also inbound (black opaque tube with green cap). After evaluating them, they work great with the TopHat, they are US Made. These arrive Wednesday in bulk. Thanks to the member who mentioned them to me via PM.

We plan on throwing a Doob Tube into every order we ship complimentary and will offer them in bulk via the shop as well. Lots going on suddenly and we are anxious to expand what we offer via our shop. There won't be many more additions to the inventory from other makers or other vaporizers beyond the Milaana (and the Zion once that ball starts moving again).

I started distributing Miron Glass within hours of coming across it in 2010 at the Vapor Room in San Francisco. Vitality Glassware deserves many kudos for being the OG & being the first to sell this glass empty as previously it was only sold with products inside via retail. The brand was MMJars (now defunct as the project manager moved on) as a spin off from their home/kitchen decor centric Violiv brand (now Vitality). Today you'll see this glass under an array of names in the industry.

Thank you all again for the support.

PS: Yesterday I had the chance of letting another Milaana vaporist try the TopHat and Stem beta run and they were quite happy with the ABV evenness, the heat transfer to the TopHat compared to the entire outerwall of the stem (it still gets hot, but not quite as hot) and the concept in general. :)
 

BadDog No

Well-Known Member
Thanks for the quick reply to my "too medicated to make sense" plea. What I really wanted to ask about was the possibility of a "slim" style 18/14 without the built in glass screen, just the Tophat. Can that be done, or are there technical issues? I use little nuggets and often through water so I'm not that worried about fine particles making it through. Not the biggest fan of cleaning built in glass screens though. Thanks again and sorry for being a p.i.t.a. :lol:
 

cannabis.pro

aka 420EDC
Accessory Maker
whats available to buy right now? im so confused..lol ..i even soke in pm but still dont know how to order
Thank you for the interest! Check out 420EDC

The only thing out of stock currently are 18mmMale:Glass screen:18mmMale GonG transitions.

Mendo Mulchers are up on the site as well as the Vitality Glassware, all of that is arriving with the 420EDC glass tomorrow. In a few days we'll add the Doob Tubes. Let us know if you have any issues ordering or other questions.
 

cannabis.pro

aka 420EDC
Accessory Maker
Grh5n46.jpg
Aa1LFtA.jpg


Sorry for the teaser on these, but folks asked to see what they look like. Some of you just bought on concept and we appreciate that kind of support. I'll work on producing more ASAP.

Some orders shipped yesterday, all the US orders who ordered promptly when announced. Orders from last week shipping within the US will go out tomorrow, and I'll be contacting international folks about shipping options or invoices via PayPal tomorrow as well.

Enjoy your Sunday!
 

cannabis.pro

aka 420EDC
Accessory Maker
@ChooChooCharlie glad everything made it OK!!

To all the folks getting the TopHats and glass stems and GonGs. When using these with the stems, you want to draw harder enough that the TopHat "clicks" into the glass screen in the short or medium stem or the taper in the "Slim" stems. If you aren't drawing hard and using draw while holding in hand, try tipping the unit back, like drinking from a beer bottle while drawing to lock and hold the TopHat in place. This isolates the heat and directs the air through the TopHat rather than around it.

When using with a GonG, this step really isn't needed as gravity is doing the work for you. Tried the 18:14 this morning myself and it worked pretty well on a medium grind and TopHat filled 1/3 full. Had to draw fairly lightly via the water.
 

djchexxx

Well-Known Member
Top hat is ~1/3 full. The top hat is perfect for people who like to microdose. I got a nice medium brown abv after 2 nice rips. The built in screen and top hat will just make it that much easier to clean in the future. Also get to save a few :2c: since I never have to buy replacement mesh screens.

Oh yeah, I really dig the little container that you threw in too. I'll definitely be grabbing some more of those with my next order! Thanks @cannabis.pro

DQZzx8Q.jpg

DQZzx8Q.jpg

51GTM63.jpg

HNUnWBh.jpg
 

SteamfunQ

Well-Known Member
I received my order about a week ago, what a fantastic bit of kit! I ordered 2x18.8mm slims, a 18.8mm screened gong and 3 top hats. Everything came well packed and arrived safely.
The 3 top hats came in a doob tube which is perfect for carrying them around, great quality and feels pretty strong.

Now onto the actual glass!
All of the pieces i received are well crafted and clean, everything fitting perfectly from the joints to the tophats. So far i have only used these pieces with a water tool, and am yet to try them dry. However even through water the flavour is significantly improved. From the first day of receiving my MI i was impressed with the flavour it delivered and with these new pieces the flavour is definitely increased!

Micro dosing with the top hats is simple and effective, the top hats can get hot so make sure you have somewhere safe to place them for emptying and in between loads.

Obviously with using whole nug's there is a trade off between clouds and vapour and i do feel that the trade off is worth it when that full flavour hits you in the face! lol
Admittedly I'm a bit of a cloud chaser but the screened gong and slim with top hat combination get used as daily flavour treats. Having said all of that i am yet to fill the gong fully up (due to limited supply) and can see that it fully loaded would create decent clouds and rather intense flavour.

Ultimately i feel these pieces increase the versatility of the already very adept Mi and should be a consideration to anyone already owning a Milaana. If your after the best taste/flavour possible then i would say they are essential for your arsenal
:D:rockon:
 

cannabis.pro

aka 420EDC
Accessory Maker
Top hat is ~1/3 full. The top hat is perfect for people who like to microdose. I got a nice medium brown abv after 2 nice rips. The built in screen and top hat will just make it that much easier to clean in the future. Also get to save a few :2c: since I never have to buy replacement mesh screens.

Oh yeah, I really dig the little container that you threw in too. I'll definitely be grabbing some more of those with my next order! Thanks @cannabis.pro
Thanks for the review of the TopHat and other glass. We appreciate the support and kind words!


I received my order about a week ago, what a fantastic bit of kit! I ordered 2x18.8mm slims, a 18.8mm screened gong and 3 top hats. Everything came well packed and arrived safely.
The 3 top hats came in a doob tube which is perfect for carrying them around, great quality and feels pretty strong.

Now onto the actual glass!
All of the pieces i received are well crafted and clean, everything fitting perfectly from the joints to the tophats. So far i have only used these pieces with a water tool, and am yet to try them dry. However even through water the flavour is significantly improved. From the first day of receiving my MI i was impressed with the flavour it delivered and with these new pieces the flavour is definitely increased!

Micro dosing with the top hats is simple and effective, the top hats can get hot so make sure you have somewhere safe to place them for emptying and in between loads.

Obviously with using whole nug's there is a trade off between clouds and vapour and i do feel that the trade off is worth it when that full flavour hits you in the face! lol
Admittedly I'm a bit of a cloud chaser but the screened gong and slim with top hat combination get used as daily flavour treats. Having said all of that i am yet to fill the gong fully up (due to limited supply) and can see that it fully loaded would create decent clouds and rather intense flavour.

Ultimately i feel these pieces increase the versatility of the already very adept Mi and should be a consideration to anyone already owning a Milaana. If your after the best taste/flavour possible then i would say they are essential for your arsenal
:D:rockon:

Wow, this is quite a favorable response to this technology. Thanks for sharing your thoughts and we hope you get resupplied soon so you can evaluate further without fear of a depleted supply.

I would like to see some bong milk shots using the top hats! looking forward to ordering soon.

Hmmm. What is this bong milk you speak of? LOL

FYI to anyone else reading the thread. More glass is in production and everything is up for sale at 420EDC again. We expect our resupply to be at our fulfillment center next week and shipping will resume on the 17th for any items like the GonGs or Short Slim stems that were out of stock.
Thanks for the support everyone, we look forward to getting this boro-tech into more hands in the weeks ahead.
 

djchexxx

Well-Known Member
Has anyone tried to use one of the top hats in a firewood4? Can anyone confirm the dimension of the top hat?

I tried, the capsule for the Milaana is a lot bigger than the FW4 capsule. From what I remember the capsule for the Milaana is about the same diameter as the FW4 mouthpiece. Around 14mm I would say.

@cannabis.pro did say he was going to make capsules with the glass screen for the FW4 when he can get his hands on one. Can you start making a list now? Because Im in on that. lol
 

cannabis.pro

aka 420EDC
Accessory Maker
I tried, the capsule for the Milaana is a lot bigger than the FW4 capsule. From what I remember the capsule for the Milaana is about the same diameter as the FW4 mouthpiece. Around 14mm I would say.

@cannabis.pro did say he was going to make capsules with the glass screen for the FW4 when he can get his hands on one. Can you start making a list now? Because Im in on that. lol

This is totally on my radar, as is hitting F5 on FWs website. I may just order the accessories and start working on these FW Tophats prior to getting an FW4. At least I can have a prototype ready when the FW4 arrives.

Back on topic: Some 420EDC stems are out of stock currently, and others are close. Time for another round of glassware. Thanks for the support everyone!!!
 

Office_Printer

Well-Known Member
This is totally on my radar, as is hitting F5 on FWs website. I may just order the accessories and start working on these FW Tophats prior to getting an FW4. At least I can have a prototype ready when the FW4 arrives.

Back on topic: Some 420EDC stems are out of stock currently, and others are close. Time for another round of glassware. Thanks for the support everyone!!!
I am getting ready to place an order. Are you still on track for first week of Dec for the screened stems?

Also, do you want to borrow a FW4? I am willing to loan it out so you can get started on the FW4 Tophats.
 
Office_Printer,

cannabis.pro

aka 420EDC
Accessory Maker
I am getting ready to place an order. Are you still on track for first week of Dec for the screened stems?

Also, do you want to borrow a FW4? I am willing to loan it out so you can get started on the FW4 Tophats.
Thank you for the interest. Expecting Short & Medium Screened Stems to arrive first full week of December. Appreciate the offer on the FW4, there is already one on the way.
 

cannabis.pro

aka 420EDC
Accessory Maker
For anyone who received any of the 420EDC Screened or Slim stem or GonGs that had a joint not cooperating with the TopHats, let me know. I have a fix that can be applied in a few minutes time. PM me or remind me if you had an issue on an order, we'll get you squared away. I think there may be one or two of you who I missed and I apologize.
 
cannabis.pro,
Top Bottom